How to get spare tire out of trunk? Follow the following steps;
- Raise the floorboard and secure it
- Open the tool kit located inside the spare tire
- Take off the screw holding both the spare tire and tool kit
- Take out the tool kit
- Take out the spare tire
Table of Contents
How to Get a Spare Tire Down Without the Tool?
Removing a spare tire without tools may seem daunting at first. But with the right equipment and skills, it’s not that difficult.
Climbing Under the Truck
As you already know, the tires hang from the bottom of the truck to the back of the vehicle. So you have to go through it to access it.
Before you crawl under a truck, remember that safety is paramount. So, apply all the brakes and park correctly on as flat a surface as possible.
These precautions are intended to prevent the vehicle from moving while working under it.
Locate and Remove Guide Tube
Locate the guide tube under the vehicle. A long black plastic tube is next to the tire. Rotate the tube back and forth by pulling it towards the vehicle’s rear to open the spare wheel lowering device.
Insert a wedge between the tire and the vehicle
While under the truck, insert a board into the gap between the top of the tire and the frame of the truck bodywork to approach the passenger side and lower the tire on that side.
You may need additional help holding the tire and inserting the tree. The tree is installed to provide easy access to the lowering unit without constantly moving the tires on the truck bed.
Remove the key using tongs.
Put your hand in the space created by the wood and touch the key on the spare wheel lowering device. A wrench is roughly like a wheel nut, and when you find it, pull it out with a jack or pliers.
Pulling out the wrench may not be sufficient and may require moving the pliers when pulling.
Lower the tire to the ground
Remove the key, leaving a hole nearly identical to the jack handle. Therefore, the spare tire can be lowered using standard tire tools. Insert the jack handle into the hole and turn counterclockwise to lower the tire.
Read: How To Bypass Parking Brake Wire On Dual?
How to get a spare tire out of Toyota Camry?
To access the spare tire and tools, open the Camry trunk and find the latch. It is a plastic rectangle with a handle on the front.
Pull the tab towards you to access the handle and use the handle to raise the floor. The handle also doubles as a hook that can be hung on a seal under the rear window.
You can see foam tires with jacks and tools built into special sockets. Lift the cover to access the tire. To remove the tire, unscrew the plastic retaining bolt and remove it by hand. Then lift the tire.
Read: How To Bypass Starter Solenoid With Screwdriver?
How to take spare tire off Toyota Highlander?
Move to a safe location and activate the alarm.
You don’t want to put yourself in a vulnerable position when changing tires. Your best bet is to stop your car on the road, turn on your hazard lights, and apply the parking brake. If replacing the front wheel, place a hazard warning light behind or in front of the vehicle’s rear wheel.
Cap Removal
The cap or wheel cap on a tire can be removed by lifting it with the flat end of a wrench.
Loosen Lug Nuts, Insert the Jack, and Raise the Highlander
Directly behind the tires is the car’s frame, allowing it to be safely lifted without damaging the car. Raise the SUV until it is about 6 inches off the ground. The Highlander Owner’s Manual tells you where to find the jack.
Loosen the lug nuts and install the spare wheel
With the Highlander firmly raised, you can remove the lug nuts from the flat tire and slide the spare wheel into the wheel. The spare should match exactly where the flat tire was just removed. Slide the spare part into place until you see the eyebolt through the hole in the rim.
Tighten the clamp nut, lower the tire and retighten
After installing the spare tire, tighten the clamp nut, lower the vehicle so the tire is on the ground but not under the weight, and retighten the clamp nut. This time as long as they can.
Lower the car and refit the hubcap Back
You can now fully lower the Highlander and refit the hubcaps to the SUV. If you have a pressure gauge, it is a good idea to check the tire pressure.
Read: How To Remove Rain-X Wiper Blades?
How to get a spare tire down without the tool Ford?
Tools needed: 2×4 small pieces, pliers, a friend to bother with (optional).
Stand under the truck, pull the guide tube, and rotate it simultaneously (pull it towards the back of the truck). This slides for you to reveal the spare wheel lowering assembly.
Get under the truck in the passenger seat of the spare tire. Pull the spare tire (passenger side) down and insert a 2×4 piece between the top of the wheel and the frame.
This will move the passenger side of the spare tire away from the frame to free up workspace.
Touch the top of the tire and find the useless spare tire reset key. Now use pliers and secure the key. Shake and pull to the back of the truck.
Here comes the pop, worried about that evil key!
Reset the tire with the standard spare tire tool, and don’t worry about that damn wrench.
How do get spare tire out of trunk Honda Civic?
To remove the spare wheel out of the trunk Honda Civic:
- Open the trunk and lift the floor cover
- Remove tool case and set aside
- Loosen the wing bolts and remove the spacer cone
- Lift the spare wheel into the trunk
How to get spare tire out of Toyota Corolla?
The spare tire is located in the trunk under the floorboards and is covered with foam rubber. Foam provides cushioning for jacks and other tools needed to replace flat tires.
Similarly, how to remove the spare wheel from below?
Go under the truck. Remove the guide tube. Remove the key with pliers.
Insert the crank into the new hole. Turn the handle counterclockwise to lower the tire.
How to put a spare tire back in the trunk?
If you have a puncture, the first step is to get off the road and install a spare tire. However, even flat tires should be properly stored in the trunk. Here’s what you need to do:
Remove the wheel cap or center cap from the
wheel.
- Turn right and down.
- Put in the wheel well where the spare wheel was.
- Turn over the spacer cone and insert the bolts from behind.
- Screw the bolt through the center of the tire into the screw hole in the trunk.
- Put jacks, wrenches and other tools back into the case.
- Put the boot inside the flat tire.
- Place the wheel cover or center cap safely in the trunk.
- Replace trunk floor cover.
- Close the trunk.
FAQs: how to get spare tire out of trunk
Can you remove the spare tire from the trunk?
How do I get my spare tire out from under my truck bed?
The bar can be lowered by turning the ratchet and seat when the seat is unlocked. Ensure the tire is unplugged from the jack, then remove the tool from under the tire. You can then remove the spare tire from under the truck. Remove the plastic cover from the spare wheel assembly with the tire missing.
You can now access the connector. The lock cylinder must be removed if the cover cannot be removed. You can use a jack if you don’t have a spare wheel jack. This will allow you to lower the spare tire and replace it with a new one.
Should you keep a spare tire in your trunk?
How do you get a tire off the back of a car?
Use Your Hazard Lights and Parking Brake
Check for Materials
Loosen the Lug Nuts
Lift Your Vehicle Off the Ground
Remove the Lug Nuts and the Tire
Place the Spare Tire on the Car
Replace the Lug Nuts
Summary
As expected, taking the spare tire out of the trunk is very easy to learn. Considered basic and essential knowledge for all severe drivers. Always know your car and the basics.
The least a driver can do is know where all the things in the car are stored. This knowledge of Spare tires and other things like spare light bulbs, first aid kits, warning tripods, jacks, etc. will help you get out of trouble faster and with more skills.
